Capacity 40 m3 / h mobile cement mortar pump 6 / 13MPa with longer
BS40-13-45 not only has the characteristics of similar high-level
pump mortar, can also directly used for mortar spraying operation
function, large capacity, high efficiency, large area of the
spraying operations of metope,suitable for high-rise building wet
mixing mortar, and used for dry mortar, most importantly is the
machine suitable for more than 100 meters of high-rise building
mortar spraying, transmission joint operation ability, integrating
1. High efficiency hydraulic double cylinder piston pump system,
electrohydraulic combined control, adopts S tube valve distribution
form, glasses plate and the floating ring using cemented carbide
cutting, high wear resistance. Flow more smooth, more stable
spraying. Using automatic centralized lubrication system, longer
service life of mortar piston, and further optimize the pumping
flow path, reduce pumping resistance.
2. Advanced hydraulic system gear automatic adjustment technology,
working condition of intelligent
matching displacement. High reliability of components, give
priority to with variable pump.
3. Accurate control system adopts the intelligent controller, high
speed and reliable running. Phase sequence automatic detection, the
start is more reliable. The remote wireless remote control,
|2||The largest outlet pressure:6/13MPa|
|3||Theoretical maximum displacement:40 m3/h|
|5||Maximum height conveying:160m|
|6||Spray largest aggregate diameter:8mm|
|7||Allow the slurry consistency:80～120mm|
|8||Allow the water retention:92%|
|9||Feeding hopper x volume level:0.4×1230 m3×mm|
|10||External dimension:3910×1660×1520 mm|
1. S pipe valve is adopted for direction switching with good
sealing and long service life.
2. S pipe valve is installed with floating wear-resisting ring
which can compensate abrasion automatically.
3. High exit pressure can satisfy pumping requirements for
4. Fine stone concrete can be pumped, and the maximum grain size is
5. Hydraulic system adopts wind cooling heat dissipation which is
convenient and no need to connect with water source.
6. It has reverse pumping function which can minimize pipe
7. Centralized lubrication system can extend service life of
rotating parts effectively.
8. Electric part adopts PLC control which has the optimum operating
9. Electric cabinet is installed with wired remote control handset
which is convenient for operation.
10. Material loading height is low, it can be easily united with
11. Guide pulley is installed on the machine which is flexible and
convenient for moving and location.
12. Integral dismountable screen mesh which is easy to be replaced.
The standard configuration
Convey steel pipe: 50A×1M×2 50A×2M×2 50A×3M×32
The variable diameter steel pipe:125A-80A×1M 80A-50A×1M
Bend pipe:R500 50A×900×3 R275 50A×450×2
Die casting aluminum alloy spray gun
Air compressor:380V 3P 400L/min 4KW
The pipe clamp aprons:80A×46 125A×2